Racks of skateboard decks produced at Empire Skateboard Manufacturing
School Skateboard Building Kits

Real skateboard manufacturing. Built for the classroom.

Give students a hands-on project built around the same materials and production steps used to make real skateboards: design, maple veneer, pressing, shaping, graphics, finishing, and a completed deck they understand from the inside out.

DesignDimensions, graphics, shape choices, and product planning.
LaminateFace, core, and crossband maple become a real structural layup.
Shape & FinishPressing, trimming, drilling, sanding, and surface preparation.
Present & RideA finished product students can explain, show, and use.
Three Ways to Build

A skateboard project for the equipment your classroom already has.

Choose the part of manufacturing you want students to learn. Empire supplies the maple materials or prepared blanks so classes can focus on laminating, shaping, or artwork.

01 · LAMINATE

Build From Maple Veneer

Students assemble seven layers of maple veneer, press their own decks, and continue through shaping and finishing. Ideal for advanced woodshop, engineering, and manufacturing programs.

Supply options: Natural or dyed veneer sets, reusable foam molds, and vacuum pressing equipment.

See Veneer Package Pricing →
02 · DESIGN & CUT

Shape Pre-Pressed Uncut Blanks

Skip the lamination step. Students plan and draw their own deck outline, then cut, edge-round, drill, sand, and finish a real maple skateboard blank.

Supply options: Factory-pressed natural or dyed maple uncut blanks. No vacuum pressing equipment required.

Request Uncut Class Pricing →
03 · DESIGN & FINISH

Decorate Pre-Shaped Skateboard Decks

For art, graphics, and design classes: begin with a deck that already has its outline cut, and let students develop their paint, illustrations, or surface-finish concepts.

Supply options: Pre-shaped maple blank decks; ask about available surface preparation and finishing options.

Request Deck Class Pricing →

Prices shown below are for veneer materials and lamination starter systems. For class quantities of pre-pressed uncuts or pre-shaped decks, request a custom quote based on quantity and specifications.

What Empire Supplies

Real manufacturing materials, matched to your lesson.

Whether students are pressing from raw veneer, cutting a custom shape from an uncut, or creating graphics on a finished shape, Empire manufactures the materials behind the lesson. Lamination programs can reuse molds and pressing equipment for future classes.

7-Ply Veneer SetsPre-counted face, core, and crossband North American maple in natural and dyed options.
Pressed Uncut BlanksReal maple deck laminations, left unshaped so students can design and cut their own outlines.
Pre-Shaped Deck BlanksPrepared skateboard shapes for art, graphics, finishing, and design-based lessons.
Pressing Equipment & RefillsReusable foam molds, vacuum bags, veneer refills, and project materials; confirm equipment availability and lead time with Empire.
Natural maple skateboard veneer used in Empire school building programs
Real Materials, Real ProcessSchool programs are built around skateboard-grade maple, reusable pressing equipment, and the same construction logic used in production decks.
School Pricing

Lamination kits: starter systems and veneer refills.

For classes building decks from raw veneer, these starter packages pair reusable foam molds and vacuum-bag pressing stations with 7-ply maple veneer. Already have pressing equipment? Order veneer-only class refills below. For pre-pressed uncuts or pre-shaped decks, request a quantity quote using the form at the bottom of this page.

15 Students

Pilot Classroom

3Reusable pressing stations
Natural Maple$805
Dyed + Natural$870

Includes 3 foam molds, 3 reusable RF-welded vacuum bags, and 15 complete veneer sets.

50 Students

Large Classroom

8Reusable pressing stations
Natural Maple$2,205
Dyed + Natural$2,455

Includes 8 foam molds, 8 reusable RF-welded vacuum bags, and 50 complete veneer sets.

Starter-system pricing: vacuum pump, adhesive, grip tape, finishing supplies, and freight are not included unless specifically quoted. The reusable stations stay with the school for future classes. Please confirm current vacuum-bag availability and equipment lead times before planning a classroom build.
Classroom Veneer Refill Pricing

Keep the equipment. Refill the material.

Once the school owns its pressing stations, future classes can reorder pre-counted 7-ply North American hard maple veneer by class size.

Class SizeNatural 7-PlyNatural / StudentDyed + Natural 7-PlyDyed / Student
15 builds$249.95$16.66$314.95$21.00
30 builds$450.00$15.00$599.85$20.00
50 builds$725.00$14.50$974.95$19.50
100 builds$1,395.00$13.95$1,895.00$18.95
Natural 7-ply construction2 face veneers · 3 long-grain core veneers · 2 crossband veneers
Dyed + natural 7-ply construction2 dyed face veneers · 1 dyed core · 2 natural cores · 2 natural crossbands

Dyed colors vary with current inventory. Shipping is additional. Programs larger than 100 builds, recurring semester orders, district purchasing, custom layups, and additional pressing stations can be quoted individually.

What Students Are Learning

The lesson is inside the manufacturing process.

The photos below are real Empire production. They show the physical ideas students are working with: grain direction, lamination, pressure, curved geometry, machining, surface finishing, and graphics.

Dyed skateboard veneer in production quantities
01 · MaterialsUnderstand the layupStudents can see why face, core, and crossband orientation matter before any glue is applied.
Skateboard decks loaded in production molds
02 · FormingPressure creates shapeThe mold and pressing system turn flat veneer into a curved structural part.
Freshly pressed uncut skateboard decks
03 · ManufacturingPressed is not finishedFresh uncuts still need perimeter work, drilling, sanding, and finishing before they become a deck.
Finished blank skateboard decks
04 · ProductFinish the objectSurface, color, graphics, and quality control turn the build into a finished product.
For Teachers & Program Leaders

One manufacturer. Three ways to bring skateboard building into your classroom.

Empire manufactures skateboard materials and decks here in Illinois. Choose complete veneer layups for lamination lessons, pre-pressed uncut blanks for shape-cutting projects, or pre-shaped decks for art and graphic design. We can help match materials and quantities to your class.

Build the program around your class.

Tell us how many students you teach and whether they will laminate, cut custom shapes, or focus on artwork. We can quote the right materials, discuss lead times, and accommodate school purchase orders.

Programs We Work With

Built for shop classes, design labs, and enrichment programs.

From a 15-student pilot to a district-wide program, we can help match materials to your curriculum and equipment.

Middle & High Schools

Combine design, shop, art, engineering, and entrepreneurship around a finished object students recognize.

Colleges & Maker Spaces

Use the deck as a materials, CAD, manufacturing, graphics, or product-development project.

After-School Programs

Scale the equipment and veneer quantities around smaller groups and recurring sessions.

Common Questions

Before requesting pricing

What does a school need to begin?

A starter system combines reusable foam-mold and vacuum-bag pressing stations with veneer for the class. Typical packages use 3 stations for 15 students, 5 stations for 30 students, or 8 stations for 50 students; one compatible vacuum pump can service multiple quick-disconnect bags.

Can students design their own deck graphics?

Yes. Programs can include hand graphics, screen printing, transfers, vinyl, paint, or another process selected by the instructor.

Can we reorder supplies for another semester?

Yes. The reusable equipment can be supported with veneer refills, additional blanks, and replacement components.

Can Empire quote a complete classroom quantity?

Yes. Published starter pricing covers 15-, 30-, and 50-student systems, and veneer refill pricing covers 15, 30, 50, and 100 builds. Larger, recurring, or custom programs can be quoted individually.

Request School Pricing

Tell us what your classroom needs.

Tell us whether your class will laminate decks, shape factory-pressed uncuts, or decorate pre-shaped decks. Your request goes directly to Empire so we can confirm options, pricing, freight, lead time, and school purchasing details.

✓ School & district purchasing✓ Starter systems or refills✓ No obligation
Loading question…
We’ll review the request and reply by email.